Storz hose tail coupling for safety clamp assembly
Storz coupling with corrugated hose tail

Technical specifications:

It is suitable for lime, cattle feed and other abrasive medium.

concrete hose - rubber hose -  abrasion resistant hose - silo hose

Technical specifications:

The rubber layflat hose is for multipurpose use. It's suitable for air, oil, petrol, and it’s moderately acid and alkali resistant. The hose has a good heat, ageing and ozone resistance. It has a great bearing capacity because of the tensile strength of the fabric insertion. It is ozone and ageing resistant.

The hose is lightweight and can be transported in a small space even with full diameter.

In case of the use of air, the recommended operating pressure is the 25% of the fracturing pressure.

With the tensile strength data, you have take in account, that in case of permanent use, the load can’t be bigger than the 1/3 of the given rate.

For the couplings mounting, ask for our advice! The sharp hose end can damage the hose or its interior.

layflat hose - rubber hose

Technical specifications:

The layflat water hose has a polyester cover, and rubber interior. It is suitable for the construction sector and agricultural use, for example as discharge hose for pumps. The EPDM rubber interior has a great resistance against chemicals, cold and higher temperature.

layflat hose - water hose

Technical specifications:

It's a steel hose coupling which is, first, used with watery medium, for example irrigation water, sewage and tailings.

It can be used on tankers, agricultural water tanks, and septic cars, also with suction and septic hoses.

The sealing is a rubber ring, which is also available in our store.

It can be ordered with different designs; usually the Becher coupling with hose tail is in stock.

Sealing can be ordered with it

becher coupling - galvanized steel coupling - cardan coupling